How to choose the furniture decoration how to distinguish the quality of furniture? When choosing furniture, beware of inferior quality and furniture materials shoddy?

August 19, 2023

The choice of decoration furniture is particularly important. There are a lot of inferior furniture on the market, and there are many furniture renovations. However, there are many furniture products on the market, and many consumers are not clear about the industry rules. They will always be confused by some small interests, and the hidden cats will be squandered. . Furniture must be selected for decoration. The size and space of the new home will cause the old furniture to be used normally. The choice of furniture has really made consumers feel a big headache. In the face of dazzling and dazzling furniture market, consumers are often difficult to distinguish between authenticity and fakeness. There are great differences in the materials used in furniture production. Some manufacturers have many cut corners in the production of furniture. The trap of stealing the beam and changing the column needs to be carefully identified to be seen.

How to distinguish inferior furniture?

1, using inferior substrate

The use of substrates that are not dried and worm-like, such furniture has a high moisture content, which can easily cause deformation or cracking after the finished furniture. Furniture made from decaying or worm-eaten wood can seriously collapse furniture.

2, substrate mixing assembly

Since the wood-based panel furniture adopts the method of veneer decoration on the outside of the substrate, although the parts of the furniture cabinet have the same appearance, some of the substrates in the furniture are moved by the manufacturer. For example, some furniture cabinet front and door use melamine board that meets environmental protection and quality requirements, while the back panel of the cabinet uses large core board with more formaldehyde emission.

3, making cut corners

Since the wood-based panels used in panel furniture are all made of adhesive bonding and are very sensitive to water, their waterproof performance must be ensured by the veneering and edge-sealing treatment of the panels. In order to save costs, some manufacturers do not seal the joint between the inner panel and the board of the furniture. On the one hand, the furniture is broken by water, and the formaldehyde in the material can not be fully blocked, which causes the furniture to have a heavy formaldehyde smell.

4, the hardware is replaced

Replace cheap hardware and cut corners in furniture installation. For example, the counter mirror of a large closet has no back panel, no beading, and is only positioned with a nail. This practice of cutting corners and cutting materials can easily cause the mirror of the counter to be broken.

Common problems with poor quality furniture:

1. The wood is not dried and the water content is high, which easily causes the furniture to deform or crack in the future. Poor quality furniture

2, using decay or insect wood, in general, such wood texture is relatively soft, consumers can use their fingers to dig, if there is a piece of falling off, it means that the wood has decayed.

3, the frame structure is loose, the frame is not tight, there are broken and broken materials, some wooden frames of furniture are not even opened, only nails are used for fixing, consumers can use hand to shake the joint parts when purchasing, especially Check the table legs and other joints to see if there is any looseness.

4, the cabinet mirror of the large wardrobe has no back body plate, no pressure strip, and only the nail positioning, such a cut corner is easy to cause the mirror of the mirror to break, becoming an unsafe hidden danger.

5, the surface coating is uneven, easy to fall off, the surface of qualified furniture should be clear texture, there should be no local color whitening, brushing and other phenomena, and the surface hand induction is flat.

6, the functional size of the furniture does not meet the quality standards, if these functional sizes do not meet the standard will directly affect the normal use of furniture.

7, furniture smell is very serious, although the window is often open, but still lingering, it is likely that the formaldehyde is seriously exceeded.

When purchasing furniture, carefully observe the furniture samples and ask the furniture manufacturers and sales personnel about the material type and brand. When signing a furniture purchase contract, the sales personnel are required to indicate the contents according to their introduction. Don't replace the color, type or simple words of the furniture with the words “consistent with the factory samples”, so that the signing of the contract is binding, so that the inferior furniture manufacturers have no cocoa.

Furniture selection should be guarded against being deceived:

1. Pay attention to whether there is any groove on the structure of the furniture frame, and whether it is glued tightly. Pay special attention to the phenomenon of breaking or breaking. For the hidden drawer inside, it is necessary to check whether there is a groove in the drawer structure, whether the glue is glued in the groove, whether the drawer and the plug are connected by nails. Before buying a sofa, you should observe it from the bottom of the sofa. If the frame only uses nail structure, it will not open your eyes or apply glue. If you take a long time, it will loosen and deform.

2, the level of workmanship is the key factor to distinguish the advantages and disadvantages of furniture. For example, if you buy a sofa or a mattress, first observe whether the appearance quality is pleasant; secondly, check the degree of straightness of the outer floss of the outer cloth, whether there is a jumper phenomenon; once again, take a look at the cover used inside, whether it is used or not. Cloth and dirty leather. The general brand manufacturer has a zipper on the side of the mattress. It is best to check the filling and workmanship of the inside.

3, wary of the sky. The leather surface of the leather sofa has no suitable hand feeling, or it is thin, soft and cool, or it is thick and dry, and the gloss is not high; the leather sofa is delicate and flexible, and the hand-featured performance is good, and the skin texture has a tendency to go and the gloss is high. When you buy solid wood furniture, you can't just look at the surface wood grain. You should be careful to cover the furniture in the middle. As long as you observe it carefully, you can find the clues of the veneer by comparing the shading and the back of the matching corner or back. . Some of the thick and heavy furniture, the surface of the furniture can not see the wood, the inside is all inferior sheet, all rely on paint, greasy packaging. If you buy it home, once the paint is dropped, it will be difficult to use it. Everyone must be careful not to move the goods home. All-inclusive sofas also have problems that are unpredictable, so inspections are important, and special attention should be paid to whether the interior wood is rough, decaying or eroding. Turn the sofa over and have a good look.

4, identify the cut corners. For example, some furniture uses medium-density slats and chipboard slats as load-bearing components. There are also some furniture, the back of the dressing mirror is not fixed by the baffle and the beading, only the nail is used as the supporting pin, which is not strong. Most of these things should be carefully checked.

5. Check the dryness of the wood inside the furniture by hand. In this way, the moisture content of the wood is determined. To know that the wood is not dried or not dried, the moisture content of a set of furniture is not the same, and the furniture is most easily deformed and sampled.

Furniture fraud method:

1, material trap

When consumers buy furniture, they are puzzled that there is no obvious difference in the appearance of the furniture, but why are the prices far apart? In fact, there is a big difference in the materials used in furniture production. Some manufacturers have many traps in the production of furniture, such as cutting corners and stealing columns, which need to be carefully identified to be seen.

2, use inferior substrate

3, substrate mixing assembly

4, internal production cut corners

In order to save costs, some manufacturers do not seal the joint between the inner panel and the board of the furniture. On the one hand, the furniture is broken by water, and the formaldehyde in the material can not be fully blocked, which causes the furniture to have a heavy formaldehyde smell.

पिछला

अगले

संपर्क करें

Author:

Ms. Sunny Shen

ईमेल:

manager@toda.group

Phone/WhatsApp:

+8618939007972